The weather is getting colder and colder and it has entered the winter. A lot of work in the winter requires special protection to work properly. Stone engraving machine is one of them, then how to maintain the stone engraving machine in winter! Today, Jinan Zhongke will introduce you how to carry out the maintenance of the stone engraving machine in winter.
The stone engraving machine's unique water cooling system, while optimizing the performance of the stone engraving machine, is also bound to its own limitations. Generally, the temperature suitable for engraving is between 0 and 45 degrees. When the temperature is lower than 0 degrees Celsius, the tap water used for cooling will freeze, which will inevitably affect the use of the engraving machine. Moreover, the relative humidity of the stone engraving machine ranges from 30% to 75%. The environment that is too dry and too humid is not conducive to the optimal control of the engraving machine and the power system. The relatively dry environment in winter is also not conducive to the normal use of the engraving machine.
Therefore, in winter, attention should be paid to the warmth of the engraving machine. The residual water in the water pipe should be removed in time to avoid the water circulation after the next day's freezing; the pump should be taken out from the water tank or bucket in time to avoid freezing inside; Secondly, pay attention to the maintenance of dry humidity in the plant. If it is too dry, you can increase the number of mopping the floor and maintain the proper humidity of the plant. It is recommended that the machine not be placed outdoors during the winter, it is best to move the machine to the factory.
