Need to pay attention to the oil on the mold engraving machine

       Everyone usually emphasizes the maintenance of the mold engraving machine. It is very important to oil the mechanical action part. Can you apply the oil on the way? I don’t know how to deal with the machine. I don’t know how to deal with it accurately. The problem is for everyone's reference. Today, I repaired a screw machine with a mold engraving machine. The fault is that the Y axis can't move. With the buzzing of the motor, first check the motor and the coupling without any problem. Also full of butter, check the line is no problem, the card and the line are also normal, the motor is removed and turned normally. If the machine is adjusted to a very low speed, it can occasionally move, so it is judged that the power supply is insufficient or the screw I didn't have a stuck place, because there is no power supply to replace the test, so I can only start with the screw. I ask the customer that the oil is very diligent, and it will last up to half a month, for convenience. Butter.
  There is friction in the parts of the mold engraving machine. In order to avoid damage caused by friction, it is necessary to oil the mold engraving machine at intervals. However, remember not to blindly oil the screw of the mold engraving machine. Frequent oiling will affect the work of the mold engraving machine, and damage the parts of the engraving machine.