Teach you a few strokes to easily deal with the failure of the advertising engraving machine

First check the engraving machine spindle motor. If the motor is hot, look at the pump work for any abnormalities, and then look at the water inside the fuselage is not lower than the liquid level. If it is true, it will be the right medicine.

Then if the speed of the motor is slow or does not turn at all, we have to check the line. We must check the motor line and cable separately to see if there is a short circuit or no power. If this is the case, we must rebuild the circuit. , return to normal operation.

There is also the motor running in the opposite direction, it is necessary to check whether there is any problem with the motor line and whether the uvw port of the output data is exchanged. If the port position is wrong, it should be adjusted in time.

Finally, the motor of the advertising engraving machine has a strange sound. At this time, it depends on whether the motor is overloaded. If it is because of the load, stop the machine in time, and wait for the machine to rest for a while.