The engraving machine control system and the engraving machine typesetting software are actually two different softwares, but sometimes we often call it the engraving machine software. The computer engraving machine control system generally uses the Weihong system. The main body is a Weihong card (the industrial control card). ) and the interface card; and the engraving machine's typesetting software is much more, such as JDPaint, ArtCam, Wentai, Mach3, etc., whether it is control system software or engraving and typesetting software, if there is a problem, then it will be easy Affect the normal use of the engraving machine.
Question 1: When opening the software, the computer prompts "Failed to open the card, please check the card".
Solution:
1. Generally speaking, in this case, check the driver of the board for the first time, because there may be 70% or 80% of the drivers on the computer that are not equipped with Weihong card.
2. If it is not because of the driver, then it may be the reason of the slot, changing a PCI slot should solve the problem;
3. If this doesn't work, it's not a slot problem. It must be a problem with Weihongka. Just change a card.
4. Of course, there are two or three percent of the faults in the data line of the machine. Reinstall the two data cables to check for broken needles.
Question 2: Prompt when opening the software: three-axis alarm, initialization error number four.
Solution:
1. Check if the two data cables of the computer and the machine are connected;
2. Check if the fuse of the adapter plate in the control box is burned out and replace the fuse;
3. Check if the 5V12V power supply is working normally.
Question 3: The software cannot be opened normally, and the engravings are deformed.
Solution:
1. It may be that there is a problem with the operating system of the engraving machine. At this time, it is necessary to reinstall the new system and software.
2. Of course, it may be the problem of the engraving machine itself, check whether the X, Y axis screw and the screw are loose;
3. Of course, if the engraving knife has a problem, it can also cause such a problem, so it is very important to select the knife according to different engraving processes.
