How to operate stone engraving machine
With the development of the engraving machine industry, the stone engraving machine has once become the stone engraving machine equipment used nowadays. It has the characteristics of simple operation and easy learning and fast engraving machine. It has always been favored by customers who are processing stone, but many customers have a longing for the engraving machine, and there is also a feeling of fear of starting, because customers will feel that CNC engraving machine equipment is difficult, difficult to operate, and so accurate, I I am afraid that I will not learn. For this question, Jinan Zhanhang will reply you, that is, we will teach the package, technical operation is not a problem, you can rest assured to buy. No one is a machine that will operate, including our technicians who are familiar with the operation of the machine after learning, but we must be careful when operating the stone engraving machine, so that it will be produced. The product is durable, so how do we operate the stone engraving machine?
The engraving machine cuts the contour, and the cut contour is generally a 3 mm corundum straight rod, which is a contour cutting knife. This is very simple.
Layered engraving, using a 3 mm emery ball head knife, as a layered engraving knife, generally determines the thickness of each layer of cutting according to the hardness of the material, generally 0.2-0.5mm, the last machine engraving, engraving is completed.
The roughing surface is finished with a 30 degree 1 mm diamond hammer ball head knife. If it is nephrite, you can use a smaller diameter hammer ball.
Head knife. The surface finishing tool path is made, the surface boundary compensation is selected to be automatically outward, the infeed mode is closed, the sharp angle filtering mode is selected as a linear delay, and finally the upper pole engraving is performed.
Fine knife, this is the last step. This step uses a 30 degree hammer flat bottom quadrangular knife. You can choose the right angle tool according to the actual situation. Out of the surface finishing tool path, the path spacing is mastered by myself. I generally use the spacing of 0.023 for the post polishing.
When we use the stone engraving machine to work, we must strictly follow the operation steps to engrave, but we must remember that if you want to engrave the double-sided brand, you can engrave the mirror groove on the wood, then buckle it in. If 502 sticks, you can sculpt the other side. Is it very simple? In fact, the steps of the stone engraving machine are as simple as this. Although the stone engraving machine can complete the operation in the above three simple steps, there are still many details to be paid attention to in the actual operation. Although the learning is simple, it still needs to be slowly in the operation. Accumulate experience so that you can skillfully engrave the technique.
